

30823 Garbsen


The wire drawing system was developed and built at the Institute of Materials Science. The equipment consists of a chain drawing machine with a maximum tensile force of 17 kN. With this system it is possible to draw wires from various materials (including steel, titanium, aluminum, magnesium) from a maximum initial diameter of 8 mm to a minimum diameter of 0.3 mm. The machine has a maximum working length of 2.5 m and has been extended with a motorized wire winding device. With this it is possible to produce wires of any length.
The wire drawing system was developed and built at the Institute of Materials Science. The equipment consists of a chain drawing machine with a maximum tensile force of 17 kN. With this system it is possible to draw wires from various materials (including steel, titanium, aluminum, magnesium) from a maximum initial diameter of 8 mm to a minimum diameter of 0.3 mm. The machine has a maximum working length of 2.5 m and has been extended with a motorized wire winding device. With this it is possible to produce wires of any length.
max. wire diameter, mm | 8 |
min. Wire diameter, mm | 0,3 |
Voltage, V | 400 |
Mains frequency, Hz | 50 |
Nominal power, kW | 17 |
Length of the system, m | 3 |
Width of the system, m | 1 |
Height of the system, m | 1 |
Drawing speed range, m/min | 0,01 - 10 |